IMPROVING THE FOOT OF CHARGING NOKIA 2100

IMPROVING THE FOOT OF CHARGING NOKIA 2100
When we want to repair the foot of charging of Nokia 2100, we should check the skring (connector) of mobile. After we open the cassing of phone, we will find 6 bolts on the surface of machine. 4 bolts in every corner of machine are the long bolts, and 2 bolts in the middle of machine are the short bolts. We must not change the bolt each other, because if we put the long bolt to the place of short bolt, it just will give us any problem. The flat of machine maybe will be broken.
To find the skring (connector) of foot of charging of this mobile, we should look seriously about foot of charging and will find a small skring. Please take a multy tester. Switch on the tester, put the positive cheker to one side of skring and the negative tester for the other. If the skring (connector) is being good, we have known the problem in foot of charging of mobile. The problem of mobile is the foot of charging (not the other?one). Here I tell about the system to repair the foot of charging.
After we open it, we separate every flat of machines. Please watch out around foot of charging on a flat of component. We will find two slice of wires around the foot of charging. Maybe the problem of mobile is because the two wires. Please make sure the position of the two wire as good as we can and make sure that the two wires are the same face, same bow and same position. If they have been okay, we try to repair the else flat of mobile. At the other flat, we will find the component of mobile phone. At the front side, we will look many tools of mobile, at the back side we will find the trace of every component. If we watch out the trace of charging foot of this phone, we should make clean it by rub this trace. It means to make easy the currently of electric from two wires from one flat to trace of charging foot in the other flat. When we finished to do it, please combine the every flat again. Check the mobile to electric by his guingine charging, you will find your mobile in good situation. It is the system to repair it. But if at the first step when we checked the skring (connector) of mobile, we fond that the skring was broken, there is a system to repair it very easily. We just take the lead and electric solder. Please solder the lead since the positive side until the negative side. The lead will cover two of these sides. When the skring just now was not being connect, now they have been being connect by cover of lead. The current will flow by this lead, but it will flow without hinderence anymore. The phone will being on and usable, even it will be very dangerous to get broken. Please notice, in 2 months or in three months, the mobile will be broken because we have changed the skring with the lead that we have solder on surface the skring (connector). But the point, we have made on the mobile, even we use a dangerous system to repair it. Maybe it is very seldom to find a man who can make a solution like this. But my son has tried it, and it is the easy one to repair, even it is not good way for our costumer if we are the technician of mobile phone. These are the system to repair the foot of charging of Nokia 2100.